PocketWizard PowerST4

The PowerST4 Receiver enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now adjust the flash power settings directly from the camera position.
$185.00
SKU
LP-22-ST4-CE

Receiver with ControlTL for Elinchrom RX

The PowerST4 Receiver enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now adjust the flash power settings directly from the camera position. Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard’s unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting.

Key Benefits:

• Use PowerTracking and when you change ISO or aperture, the lights automatically adjust their power setting.

• Add the AC3 ZoneController to control up to three zones of light independently.
• Use the AC3’s Manual Mode and adjust the output of your Elinchrom RX flashes from the camera position in 1/3rd stop increments.
• Combine manual and auto modes or toggle zones on and off and unleash your creativity.

• Use HyperSync to increase your maximum x-sync speed and Optimized Rear Curtain Sync to create natural looking movement in your images.

Frequency: 340.00 - 354.00 US FCC/IC, 433.42 - 434.42 MHz - CE

Channels: 52 Channels over 26 Frequencies - US FCC/IC, 35 Channels over 5 Frequencies - CE

Antenna: 2.7" (6.9 cm) rubberized

Mounting: Five-pin remote socket

Zone Select Switch: A-B-C

Status Indicator: LED: Green, Amber, Red Status indications

USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground

Operating temperature: Above -15° C (5° F) and below 50° C (120° F)

Storage temperature: (without battery) Above -30° C (22° F) and below 85° C (185° F)

Construction: high impact plastic, rubberized antenna

Power: Receives power from attached flash

Dimensions: 3.6" (9.2cm) long x 2.2" (5.5 cm) wide x 1" (2.5 cm) tall

Weight: .77 ounces (21.83 grams)

Included in the box:PowerST4 Receiver, Quick Guide, RoHS Compliant

Requirements:

Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability. May be paired with any PocketWizard transmitter or transceiver for simple triggering.

More Information
Manufacturer PocketWizard
Short Description The PowerST4 Receiver enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now adjust the flash power settings directly from the camera position.
SKU LP-22-ST4-CE
Search Weight 2
Meta Description The PowerST4 Receiver enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account